Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 BMW X3Oil Type & Capacity
OEM spec from the factory service manual for the sDrive28i variant.
Quick Answer
Oil Type
BMW Gasoline Engines. Oil viscosity of 0W-20, LL-14 FE+
Capacity (w/ Filter)
5.10 QTS.
4.82 L
Variant
sDrive28i
Note: As of 7/2015 production, gasoline and diesel engine equipped vehicles have a new engine oil viscosity label (located on underside of engine compartment lid). These engines require a zero weight viscosity engine oil.
Approximate capacity.
Source: Factory service manual — 2016 BMW X3 sDrive28i. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2016 BMW X3 take?
- The 2016 BMW X3 requires BMW Gasoline Engines. Oil viscosity of 0W-20, LL-14 FE+. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the sDrive28i configuration.
- How much oil does a 2016 BMW X3 need?
- The 2016 BMW X3 takes 5.10 QTS. (4.82 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2016 BMW X3?
- Yes — synthetic oil that meets the BMW Gasoline Engines. Oil viscosity of 0W-20, LL-14 FE+ specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2016 BMW X3?
- Using oil that does not meet the BMW Gasoline Engines. Oil viscosity of 0W-20, LL-14 FE+ specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.