Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Bmw X3 Xdrive28i Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2016 (2016).
Quick Answer
Air Cond Compressor Oil
— PAG 46
Automatic Transmission Fluid
8.98 QTS. (8.49 L) — Automatic Transmission Fluid ATF+3
Brake Fluid
— BMW Brake Fluid DOT 4 with low viscosity
Differential Gear Oil
— Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Only for Rear differential, not for hang-on clutch (HOC)
Engine Coolant (sDrive28i,xDrive28i,Gas)
7.93 QTS. (7.5 L) — Frostox HT-12 antifreeze and corrosion inhibitor
Engine Oil (2.0L Eng,Gas)
5.10 QTS. (4.82 L) — BMW Gasoline Engines. Oil viscosity of 0W-20, LL-14 FE+
Notes
- →See Underhood Decal for oil capacity.
- →The nameplate in the engine compartment indicates which refrigerant has been used.
- →Approximate capacity.
- →BMW Part No. 83 22 2 365 988.
- →Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
- →As of 7/2015 production, gasoline and diesel engine equipped vehicles have a new engine oil viscosity label (located on underside of engine compartment lid). These engines require a zero weight viscosity engine oil. Approximate capacity.
- →Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
This vehicle's factory manual
2016 Bmw X3 Xdrive28i: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Related for Your 2016 Bmw X3 Xdrive28i
Frequently Asked Questions
- What are the fluid capacities for a 2016 Bmw X3 Xdrive28i?
- The 2016 Bmw X3 Xdrive28i fluid capacities are: Air Cond Compressor Oil: — PAG 46, Automatic Transmission Fluid: 8.98 QTS. (8.49 L) — Automatic Transmission Fluid ATF+3, Brake Fluid: — BMW Brake Fluid DOT 4 with low viscosity, Differential Gear Oil: — Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Only for Rear differential, not for hang-on clutch (HOC), Engine Coolant (sDrive28i,xDrive28i,Gas): 7.93 QTS. (7.5 L) — Frostox HT-12 antifreeze and corrosion inhibitor, Engine Oil (2.0L Eng,Gas): 5.10 QTS. (4.82 L) — BMW Gasoline Engines. Oil viscosity of 0W-20, LL-14 FE+.
- How much engine oil does a 2016 Bmw X3 Xdrive28i take?
- Engine oil capacity depends on the engine and whether the filter is changed. Check the applicable manual for your exact vehicle and service procedure before filling.