Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Bmw M2 Automatic Dct Trans Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2016-2021 (2016-2021).
Quick Answer
Air Cond Compressor Oil
— PAG 46
Automatic Transmission Fluid
8.88 QTS. (8.4 L) — BMW DCTF-1
Brake Fluid
— BMW Brake Fluid DOT 4 with low viscosity
Engine Coolant
4.12 QTS. (3.89 L) — Frostox HT-12 antifreeze and corrosion inhibitor
Engine Oil
6.90 QTS. (6.52 L) — BMW Gasoline Engines. Oil viscosity of 0W-30, LL-01 FE
Manual Transmission Fluid
1.70 QTS. (1.6 L) — Manual Gearbox Oil MTF-LT-5
Notes
- →See Underhood Decal for oil capacity.
- →The nameplate in the engine compartment indicates which refrigerant has been used.
- →Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
- →As of 7/2015 production, gasoline and diesel engine equipped vehicles have a new engine oil viscosity label (located on underside of engine compartment lid). These engines require a zero weight viscosity engine oil. Approximate capacity.
- →BMW Part No. 83 22 2 156 969.
- →Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
This vehicle's factory manual
The spec is above. This opens the 2016 Bmw factory books so you can go into the M2 Automatic Dct Trans procedure.
Related for Your 2016 Bmw M2 Automatic Dct Trans
Frequently Asked Questions
- What are the fluid capacities for a 2016 Bmw M2 Automatic Dct Trans?
- The 2016 Bmw M2 Automatic Dct Trans fluid capacities are: Air Cond Compressor Oil: — PAG 46, Automatic Transmission Fluid: 8.88 QTS. (8.4 L) — BMW DCTF-1, Brake Fluid: — BMW Brake Fluid DOT 4 with low viscosity, Engine Coolant: 4.12 QTS. (3.89 L) — Frostox HT-12 antifreeze and corrosion inhibitor, Engine Oil: 6.90 QTS. (6.52 L) — BMW Gasoline Engines. Oil viscosity of 0W-30, LL-01 FE, Manual Transmission Fluid: 1.70 QTS. (1.6 L) — Manual Gearbox Oil MTF-LT-5.
- How much engine oil does a 2016 Bmw M2 Automatic Dct Trans take?
- The 2016 Bmw M2 Automatic Dct Trans takes 6.90 QTS. (6.52 L) — BMW Gasoline Engines. Oil viscosity of 0W-30, LL-01 FE.