Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Bmw 340i Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2016 (2016).
Quick Answer
Automatic Transmission Fluid
9.30 QTS. (8.8 L) — Automatic Transmission Fluid ATF+3
Brake Fluid
— BMW Brake Fluid DOT 4 with low viscosity
Differential Gear Oil
— Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Only for Rear differential, not for hang-on clutch (HOC) Note: BMW Part No. 83 22 2 365 988.
Engine Coolant (Automatic Trans)
11.09 QTS. (10.49 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
Engine Coolant
4.13 QTS. (3.9 L) — Frostox HT-12 antifreeze and corrosion inhibitor
Engine Oil
6.50 QTS. (6.15 L) — BMW Gasoline Engines. Oil viscosity of 0W-20, LL-14 FE+ Note: As of 7/2015 production, gasoline and diesel engine equipped vehicles have a new engine oil viscosity label (located on underside of engine compartment lid). These engines require a zero weight viscosity engine oil. Approximate capacity.
Manual Transmission Fluid
1.26 QTS. (1.19 L) — Manual Gearbox Oil MTF-LT-5 Note: BMW Part No. 83 22 2 156 969.
Engine Coolant (Standard Trans)
9.82 QTS. (9.29 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
Notes
- →The nameplate in the engine compartment indicates which refrigerant has been used.
- →BMW Part No. 83 22 2 365 988.
- →Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
- →As of 7/2015 production, gasoline and diesel engine equipped vehicles have a new engine oil viscosity label (located on underside of engine compartment lid). These engines require a zero weight viscosity engine oil. Approximate capacity.
- →BMW Part No. 83 22 2 156 969.
This vehicle's factory manual
The spec is above. This opens the 2016 Bmw factory books so you can go into the 340i procedure.
Related for Your 2016 Bmw 340i
Frequently Asked Questions
- What are the fluid capacities for a 2016 Bmw 340i?
- The 2016 Bmw 340i fluid capacities are: Automatic Transmission Fluid: 9.30 QTS. (8.8 L) — Automatic Transmission Fluid ATF+3, Brake Fluid: — BMW Brake Fluid DOT 4 with low viscosity, Differential Gear Oil: — Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Only for Rear differential, not for hang-on clutch (HOC) Note: BMW Part No. 83 22 2 365 988., Engine Coolant (Automatic Trans): 11.09 QTS. (10.49 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts)., Engine Coolant: 4.13 QTS. (3.9 L) — Frostox HT-12 antifreeze and corrosion inhibitor, Engine Oil: 6.50 QTS. (6.15 L) — BMW Gasoline Engines. Oil viscosity of 0W-20, LL-14 FE+ Note: As of 7/2015 production, gasoline and diesel engine equipped vehicles have a new engine oil viscosity label (located on underside of engine compartment lid). These engines require a zero weight viscosity engine oil. Approximate capacity., Manual Transmission Fluid: 1.26 QTS. (1.19 L) — Manual Gearbox Oil MTF-LT-5 Note: BMW Part No. 83 22 2 156 969., Engine Coolant (Standard Trans): 9.82 QTS. (9.29 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts)..
- How much engine oil does a 2016 Bmw 340i take?
- The 2016 Bmw 340i takes 6.50 QTS. (6.15 L) — BMW Gasoline Engines. Oil viscosity of 0W-20, LL-14 FE+ Note: As of 7/2015 production, gasoline and diesel engine equipped vehicles have a new engine oil viscosity label (located on underside of engine compartment lid). These engines require a zero weight viscosity engine oil. Approximate capacity..