2015 Subaru BrzOil Type & Capacity

OEM spec from the factory service manual for the Limited, Automatic Trans variant.

Quick Answer

Oil Type

$ILSAC Multigrade Engine Oil. API - SAE 0W-20 Synthetic Oil Recommended

Capacity (w/ Filter)

5.70 QTS.

5.39 L

Variant

Limited, Automatic Trans

Note: The engine oil capacity is a reference quantity to be used when changing the engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick.

This vehicle's factory manual

The oil spec is above. This opens the fluids section of the 2015 Subaru Brz Limited, Automatic Trans factory book.

Open the 2015 Subaru manual
Sister site: See this spec on WhatTypeOfOil.com β€” our quick oil type & capacity lookup for every vehicle.

Related for Your 2015 Subaru Brz

Frequently Asked Questions

What type of oil does a 2015 Subaru Brz take?
The 2015 Subaru Brz requires ILSAC Multigrade Engine Oil. API - SAE 0W-20 Synthetic Oil Recommended. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the Limited, Automatic Trans configuration.
How much oil does a 2015 Subaru Brz need?
The 2015 Subaru Brz takes 5.70 QTS. (5.39 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 2015 Subaru Brz?
Yes β€” synthetic oil that meets the ILSAC Multigrade Engine Oil. API - SAE 0W-20 Synthetic Oil Recommended specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 2015 Subaru Brz?
Using oil that does not meet the ILSAC Multigrade Engine Oil. API - SAE 0W-20 Synthetic Oil Recommended specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.