Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2015 Ford Fusion Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2015 (2015).
Quick Answer
Air Cond Compressor Oil (Gas/Electric)
4.90 OZS. (0.14 L) — YN-32
Automatic Transmission Fluid (Automatic CVT Trans)
5.70 QTS. (5.39 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Approximate dry fill capacity. Actual amount may vary during fluid changes. Automatic Transmission that require MERCON LV should only use MERCON LV ATF.
Automatic Transmission Fluid
1.32 QTS. (1.24 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Approximate dry fill capacity. Actual amount may vary during fluid changes. Automatic Transmission that require MERCON LV should only use MERCON LV ATF.
Brake Fluid
— MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. Note: Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2.
Engine Coolant (Energi SE Luxury,Energi Titanium,2.0L Eng,Gas/Electric)
8.80 QTS. (8.32 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.
Engine Coolant (Gas/Electric)
1.20 QTS. (1.13 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.
Engine Oil (2.0L Eng,Gas/Electric)
4.50 QTS. (4.25 L) — MOTORCRAFT SAE 0W-20 Motor Oil Note: The engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API certification mark for gasoline engines. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty. DO NOT use oils labeled as API SN unless the label also displays the API certification mark. These oils do not meet the requirements of your vehicle’s engine and emissions system. You can use SAE 5W-20 oil if SAE 0W-20 oil is not available.
Manual Transmission Fluid
1.76 QTS. (1.66 L) — MOTORCRAFT Dual Clutch Transmission Fluid XT-11-QDC
Transfer Case Fluid
0.37 QTS. (0.35 L) — MOTORCRAFT SAE 75W-140 Synthetic Rear Axle Lubricant
Engine Coolant (S Hybrid,SE Hybrid,Titanium Hybrid,2.0L Eng,Gas/Electric)
7.40 QTS. (7 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.
Air Cond Compressor Oil (Gas)
4.90 OZS. (0.14 L) — PAG 46
Automatic Transmission Fluid (Automatic Trans)
8.98 QTS. (8.49 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Approximate dry fill capacity. Actual amount may vary during fluid changes. Automatic Transmission that require MERCON LV should only use MERCON LV ATF.
Engine Coolant (2.5L Eng)
7.20 QTS. (6.81 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.
Engine Oil (2.5L Eng)
5.70 QTS. (5.39 L) — MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil or SAE 5W-20 Premium Synthetic Blend Motor Oil Note: Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specification. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API Certification Mark. Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty.
Engine Coolant (1.5L Eng)
11.10 QTS. (10.5 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.
Engine Oil (1.5L Eng)
4.30 QTS. (4.06 L) — MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil or SAE 5W-20 Premium Synthetic Blend Motor Oil
Engine Coolant (1.6L Eng)
8.45 QTS. (7.99 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.
Engine Oil (1.6L Eng)
4.30 QTS. (4.06 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend
Differential Gear Oil (AWD)
1.22 QTS. (1.15 L) — MOTORCRAFT SAE 80W-90 Premium Rear Axle Lubricant
Engine Coolant (2.0L Eng,Gas)
8.90 QTS. (8.42 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.
Engine Oil (2.0L Eng,Gas)
5.70 QTS. (5.39 L) — MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil or SAE 5W-30 Premium Synthetic Blend Motor Oil Note: Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specification. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API Certification Mark. Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty.
Notes
- →The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Opening the air conditioning refrigerant system can cause personal injury.
- →Approximate dry fill capacity. Actual amount may vary during fluid changes. Automatic Transmission that require MERCON LV should only use MERCON LV ATF.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2.
- →Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.
- →The engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API certification mark for gasoline engines. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty. DO NOT use oils labeled as API SN unless the label also displays the API certification mark. These oils do not meet the requirements of your vehicle’s engine and emissions system. You can use SAE 5W-20 oil if SAE 0W-20 oil is not available.
- →Follow the Manufacturer's Instructions for the mixture ratio.
- →Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specification. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API Certification Mark. Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty.
This vehicle's factory manual
The spec is above. This opens the 2015 Ford factory books so you can go into the Fusion procedure.
Related for Your 2015 Ford Fusion
Maintenance Specs
Popular Repairs
Frequently Asked Questions
- What are the fluid capacities for a 2015 Ford Fusion?
- The 2015 Ford Fusion fluid capacities are: Air Cond Compressor Oil (Gas/Electric): 4.90 OZS. (0.14 L) — YN-32, Automatic Transmission Fluid (Automatic CVT Trans): 5.70 QTS. (5.39 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Approximate dry fill capacity. Actual amount may vary during fluid changes. Automatic Transmission that require MERCON LV should only use MERCON LV ATF., Automatic Transmission Fluid: 1.32 QTS. (1.24 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Approximate dry fill capacity. Actual amount may vary during fluid changes. Automatic Transmission that require MERCON LV should only use MERCON LV ATF., Brake Fluid: — MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. Note: Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2., Engine Coolant (Energi SE Luxury,Energi Titanium,2.0L Eng,Gas/Electric): 8.80 QTS. (8.32 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary., Engine Coolant (Gas/Electric): 1.20 QTS. (1.13 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary., Engine Oil (2.0L Eng,Gas/Electric): 4.50 QTS. (4.25 L) — MOTORCRAFT SAE 0W-20 Motor Oil Note: The engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API certification mark for gasoline engines. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty. DO NOT use oils labeled as API SN unless the label also displays the API certification mark. These oils do not meet the requirements of your vehicle’s engine and emissions system. You can use SAE 5W-20 oil if SAE 0W-20 oil is not available., Manual Transmission Fluid: 1.76 QTS. (1.66 L) — MOTORCRAFT Dual Clutch Transmission Fluid XT-11-QDC, Transfer Case Fluid: 0.37 QTS. (0.35 L) — MOTORCRAFT SAE 75W-140 Synthetic Rear Axle Lubricant, Engine Coolant (S Hybrid,SE Hybrid,Titanium Hybrid,2.0L Eng,Gas/Electric): 7.40 QTS. (7 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary., Air Cond Compressor Oil (Gas): 4.90 OZS. (0.14 L) — PAG 46, Automatic Transmission Fluid (Automatic Trans): 8.98 QTS. (8.49 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Approximate dry fill capacity. Actual amount may vary during fluid changes. Automatic Transmission that require MERCON LV should only use MERCON LV ATF., Engine Coolant (2.5L Eng): 7.20 QTS. (6.81 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary., Engine Oil (2.5L Eng): 5.70 QTS. (5.39 L) — MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil or SAE 5W-20 Premium Synthetic Blend Motor Oil Note: Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specification. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API Certification Mark. Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty., Engine Coolant (1.5L Eng): 11.10 QTS. (10.5 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary., Engine Oil (1.5L Eng): 4.30 QTS. (4.06 L) — MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil or SAE 5W-20 Premium Synthetic Blend Motor Oil, Engine Coolant (1.6L Eng): 8.45 QTS. (7.99 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary., Engine Oil (1.6L Eng): 4.30 QTS. (4.06 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend, Differential Gear Oil (AWD): 1.22 QTS. (1.15 L) — MOTORCRAFT SAE 80W-90 Premium Rear Axle Lubricant, Engine Coolant (2.0L Eng,Gas): 8.90 QTS. (8.42 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary., Engine Oil (2.0L Eng,Gas): 5.70 QTS. (5.39 L) — MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil or SAE 5W-30 Premium Synthetic Blend Motor Oil Note: Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specification. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API Certification Mark. Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty..
- How much engine oil does a 2015 Ford Fusion take?
- The 2015 Ford Fusion takes 4.90 OZS. (0.14 L) — YN-32.