2015 Ford Fusion Titanium Hybrid Fluid Capacities

OEM fluid capacity chart from the factory service manual for the 2015 (2015).

Quick Answer

Air Cond Compressor Oil (Gas/Electric)

4.90 OZS. (0.14 L) β€” YN-32

Automatic Transmission Fluid (Automatic CVT Trans)

5.70 QTS. (5.39 L) β€” MOTORCRAFT Automatic Transmission Fluid MERCON LV

Automatic Transmission Fluid

1.32 QTS. (1.24 L) β€” MOTORCRAFT Automatic Transmission Fluid MERCON LV

Brake Fluid

β€” MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent.

Engine Coolant (Gas/Electric)

1.20 QTS. (1.13 L) β€” MOTORCRAFT Orange Antifreeze/Coolant Prediluted

Engine Coolant (S Hybrid,SE Hybrid,Titanium Hybrid,2.0L Eng,Gas/Electric)

7.40 QTS. (7 L) β€” MOTORCRAFT Orange Antifreeze/Coolant Prediluted

Engine Oil (2.0L Eng,Gas/Electric)

4.50 QTS. (4.25 L) β€” MOTORCRAFT SAE 0W-20 Motor Oil

Manual Transmission Fluid

1.76 QTS. (1.66 L) β€” MOTORCRAFT Dual Clutch Transmission Fluid XT-11-QDC

Transfer Case Fluid

0.37 QTS. (0.35 L) β€” MOTORCRAFT SAE 75W-140 Synthetic Rear Axle Lubricant

Notes

  • β†’The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Opening the air conditioning refrigerant system can cause personal injury.
  • β†’Approximate dry fill capacity. Actual amount may vary during fluid changes. Automatic Transmission that require MERCON LV should only use MERCON LV ATF.
  • β†’Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2.
  • β†’Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.
  • β†’The engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API certification mark for gasoline engines. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty. DO NOT use oils labeled as API SN unless the label also displays the API certification mark. These oils do not meet the requirements of your vehicle’s engine and emissions system. You can use SAE 5W-20 oil if SAE 0W-20 oil is not available.
  • β†’Follow the Manufacturer's Instructions for the mixture ratio.
Source: Factory service manual β€” 2015 Ford Fusion Titanium Hybrid 2015.

This vehicle's factory manual

2015 Ford Fusion Titanium Hybrid: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual

Related for Your 2015 Ford Fusion Titanium Hybrid

Frequently Asked Questions

What are the fluid capacities for a 2015 Ford Fusion Titanium Hybrid?
The 2015 Ford Fusion Titanium Hybrid fluid capacities are: Air Cond Compressor Oil (Gas/Electric): 4.90 OZS. (0.14 L) β€” YN-32, Automatic Transmission Fluid (Automatic CVT Trans): 5.70 QTS. (5.39 L) β€” MOTORCRAFT Automatic Transmission Fluid MERCON LV, Automatic Transmission Fluid: 1.32 QTS. (1.24 L) β€” MOTORCRAFT Automatic Transmission Fluid MERCON LV, Brake Fluid: β€” MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent., Engine Coolant (Gas/Electric): 1.20 QTS. (1.13 L) β€” MOTORCRAFT Orange Antifreeze/Coolant Prediluted, Engine Coolant (S Hybrid,SE Hybrid,Titanium Hybrid,2.0L Eng,Gas/Electric): 7.40 QTS. (7 L) β€” MOTORCRAFT Orange Antifreeze/Coolant Prediluted, Engine Oil (2.0L Eng,Gas/Electric): 4.50 QTS. (4.25 L) β€” MOTORCRAFT SAE 0W-20 Motor Oil, Manual Transmission Fluid: 1.76 QTS. (1.66 L) β€” MOTORCRAFT Dual Clutch Transmission Fluid XT-11-QDC, Transfer Case Fluid: 0.37 QTS. (0.35 L) β€” MOTORCRAFT SAE 75W-140 Synthetic Rear Axle Lubricant.
How much engine oil does a 2015 Ford Fusion Titanium Hybrid take?
Engine oil capacity depends on the engine and whether the filter is changed. Check the applicable manual for your exact vehicle and service procedure before filling.