Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2015 Ford F-250-super-duty Fluid Capacities
OEM fluid capacity chart from the factory service manual for the 2015 (2015).
Quick Answer
Air Cond Compressor Oil
3.40 OZS. (0.1 L) — PAG 46
Automatic Transmission Fluid
17.50 QTS. (16.56 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Use the correct automatic transmission fluid. Transmission fluid requirements are indicated on the dipstick blade or the dipstick handle. Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Fill to the proper capacity according to dipstick Type A or Type B.
Automatic Transmission Fluid (6 Spd Trans)
16.70 QTS. (15.8 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Use the correct automatic transmission fluid. Transmission fluid requirements are indicated on the dipstick blade or the dipstick handle. Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Fill to the proper capacity according to dipstick Type A or Type B.
Brake Fluid
Note: Ford recommends using Motorcraft (Ford) DOT 3 LV High Performance Motor Vehicle Brake Fluid, Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A1 or WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
Differential Gear Oil
6.90 PTS. (3.26 L) — SAE 75W-140 Synthetic Rear Axle Gear Oil Note: Add 8 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Limited Slip Axles. FORD design rear axles contain a synthetic lubricant that does not required changing unless the axle has been submerged in water.
Engine Coolant (6.2L Eng)
21.30 QTS. (20.15 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle.
Engine Oil (6.2L Eng)
7.00 QTS. (6.62 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil Note: Ford has designed your engine to use Motorcraft engine oils or equivalent oils that meet Ford’s specification. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API Certification Mark for gasoline engines. DO NOT use oils labeled as API SN unless the label also displays the API certification mark. These oils do not meet the requirements of your vehicle’s engine and emissions system. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty.
Transfer Case Fluid
2.00 QTS. (1.89 L) — MOTORCRAFT Transfer Case Fluid
Engine Coolant (6.7L Eng)
11.70 QTS. (11.07 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle.
Engine Oil (6.7L Eng)
13.00 QTS. (12.3 L) — MOTORCRAFT Motor Oil SAE 10W-30 Super Duty Diesel Motor Oil, SAE 15W-40 Super Duty Diesel Motor Oil, SAE 5W-40 Full Synthetic Diesel Motor Oil , 0W-40 Full Synthetic Diesel Motor Oil
Notes
- →Use the correct automatic transmission fluid. Transmission fluid requirements are indicated on the dipstick blade or the dipstick handle. Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Fill to the proper capacity according to dipstick Type A or Type B.
- →Ford recommends using Motorcraft (Ford) DOT 3 LV High Performance Motor Vehicle Brake Fluid, Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A1 or WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →Add 8 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Limited Slip Axles. FORD design rear axles contain a synthetic lubricant that does not required changing unless the axle has been submerged in water.
- →Add the coolant type originally equipped in the vehicle.
- →Ford has designed your engine to use Motorcraft engine oils or equivalent oils that meet Ford’s specification. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API Certification Mark for gasoline engines. DO NOT use oils labeled as API SN unless the label also displays the API certification mark. These oils do not meet the requirements of your vehicle’s engine and emissions system. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty.
- →Follow the Manufacturer's Instructions for the mixture ratio.
- →48.0 fl. oz. (1.4l) per addition if required.
- →16 fl. oz. (473 ml) per addition if required.
This vehicle's factory manual
2015 Ford F-250-super-duty: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Related for Your 2015 Ford F-250-super-duty
Frequently Asked Questions
- What are the fluid capacities for a 2015 Ford F-250-super-duty?
- The 2015 Ford F-250-super-duty fluid capacities are: Air Cond Compressor Oil: 3.40 OZS. (0.1 L) — PAG 46, Automatic Transmission Fluid: 17.50 QTS. (16.56 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Use the correct automatic transmission fluid. Transmission fluid requirements are indicated on the dipstick blade or the dipstick handle. Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Fill to the proper capacity according to dipstick Type A or Type B., Automatic Transmission Fluid (6 Spd Trans): 16.70 QTS. (15.8 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Use the correct automatic transmission fluid. Transmission fluid requirements are indicated on the dipstick blade or the dipstick handle. Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Fill to the proper capacity according to dipstick Type A or Type B., Brake Fluid: Note: Ford recommends using Motorcraft (Ford) DOT 3 LV High Performance Motor Vehicle Brake Fluid, Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A1 or WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir., Differential Gear Oil: 6.90 PTS. (3.26 L) — SAE 75W-140 Synthetic Rear Axle Gear Oil Note: Add 8 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Limited Slip Axles. FORD design rear axles contain a synthetic lubricant that does not required changing unless the axle has been submerged in water., Engine Coolant (6.2L Eng): 21.30 QTS. (20.15 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle., Engine Oil (6.2L Eng): 7.00 QTS. (6.62 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil Note: Ford has designed your engine to use Motorcraft engine oils or equivalent oils that meet Ford’s specification. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API Certification Mark for gasoline engines. DO NOT use oils labeled as API SN unless the label also displays the API certification mark. These oils do not meet the requirements of your vehicle’s engine and emissions system. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty., Transfer Case Fluid: 2.00 QTS. (1.89 L) — MOTORCRAFT Transfer Case Fluid, Engine Coolant (6.7L Eng): 11.70 QTS. (11.07 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle., Engine Oil (6.7L Eng): 13.00 QTS. (12.3 L) — MOTORCRAFT Motor Oil SAE 10W-30 Super Duty Diesel Motor Oil, SAE 15W-40 Super Duty Diesel Motor Oil, SAE 5W-40 Full Synthetic Diesel Motor Oil , 0W-40 Full Synthetic Diesel Motor Oil.
- How much engine oil does a 2015 Ford F-250-super-duty take?
- Engine oil capacity depends on the engine and whether the filter is changed. Check the applicable manual for your exact vehicle and service procedure before filling.