2015 Bmw 640i 2d Coupe Fluid Capacities

OEM fluid capacity chart from the factory service manual for the 2015 (2015).

Quick Answer

Air Cond Compressor Oil

Automatic Transmission Fluid

8.98 QTS. (8.49 L) β€” Automatic Transmission Fluid ATF+3

Brake Fluid

β€” BMW Brake Fluid DOT 4 with low viscosity

Differential Gear Oil

β€” Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Only for Rear differential, not for hang-on clutch (HOC)

Engine Coolant

10.78 QTS. (10.2 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor

Engine Oil

6.90 QTS. (6.52 L) β€” BMW High Performance Synthetic Engine Oil, SAE 5W-30

Notes

  • β†’See Underhood Decal.
  • β†’The nameplate in the engine compartment indicates which refrigerant has been used.
  • β†’BMW Part No. 83 22 2 365 988.
  • β†’BMW Part No. 07 51 0 017 866.
  • β†’Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
Source: Factory service manual β€” 2015 Bmw 640i 2d Coupe 2015.

This vehicle's factory manual

The spec is above. This opens the 2015 Bmw factory books so you can go into the 640i 2d Coupe procedure.

Open the 2015 Bmw manual

Related for Your 2015 Bmw 640i 2d Coupe

Frequently Asked Questions

What are the fluid capacities for a 2015 Bmw 640i 2d Coupe?
The 2015 Bmw 640i 2d Coupe fluid capacities are: Air Cond Compressor Oil: , Automatic Transmission Fluid: 8.98 QTS. (8.49 L) β€” Automatic Transmission Fluid ATF+3, Brake Fluid: β€” BMW Brake Fluid DOT 4 with low viscosity, Differential Gear Oil: β€” Hypoid Axle Oil G3 (Fuchs Titan EG 4218) Only for Rear differential, not for hang-on clutch (HOC), Engine Coolant: 10.78 QTS. (10.2 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor, Engine Oil: 6.90 QTS. (6.52 L) β€” BMW High Performance Synthetic Engine Oil, SAE 5W-30.
How much engine oil does a 2015 Bmw 640i 2d Coupe take?
The 2015 Bmw 640i 2d Coupe takes 6.90 QTS. (6.52 L) β€” BMW High Performance Synthetic Engine Oil, SAE 5W-30.