Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 Volvo S80Oil Type & Capacity
OEM spec from the factory service manual for the 3.2, 3.2L Eng VIN 94 variant.
Quick Answer
Oil Type
Full Synthetic engine oil meeting the minimum ACEA A5/B5 must be used, SAE 5W-30
Capacity (w/ Filter)
7.18 QTS.
6.79 L
Variant
3.2, 3.2L Eng VIN 94
Note: Incorrect viscosity oil can shorten engine life under normal use. SAE 5W-30 will provide good fuel economy and engine protection. Volvo oil VCC RBS0-2AE/SAE 0W20 is recommended for extreme driving conditions.
Source: Factory service manual — 2014 Volvo S80 3.2, 3.2L Eng VIN 94. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2014 Volvo S80 take?
- The 2014 Volvo S80 requires Full Synthetic engine oil meeting the minimum ACEA A5/B5 must be used, SAE 5W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 3.2, 3.2L Eng VIN 94 configuration.
- How much oil does a 2014 Volvo S80 need?
- The 2014 Volvo S80 takes 7.18 QTS. (6.79 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2014 Volvo S80?
- Yes — synthetic oil that meets the Full Synthetic engine oil meeting the minimum ACEA A5/B5 must be used, SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2014 Volvo S80?
- Using oil that does not meet the Full Synthetic engine oil meeting the minimum ACEA A5/B5 must be used, SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.