Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 Subaru LegacyOil Type & Capacity
OEM spec from the factory service manual for the 2.5i Limited variant.
Quick Answer
Oil Type
ILSAC GF-4 or GF-5, API - SAE 0W-20 Synthetic Engine Oil
Capacity (w/ Filter)
6.00 QTS.
5.67 L
Variant
2.5i Limited
Note: If 0W-20 synthetic oil is not available 5W-30 or 5W-40 conventional oil may be used if replenishment is needed but should be changed to 0W-20 synthetic oil at the next oil change.
Source: Factory service manual — 2014 Subaru Legacy 2.5i Limited. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2014 Subaru Legacy take?
- The 2014 Subaru Legacy requires ILSAC GF-4 or GF-5, API - SAE 0W-20 Synthetic Engine Oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 2.5i Limited configuration.
- How much oil does a 2014 Subaru Legacy need?
- The 2014 Subaru Legacy takes 6.00 QTS. (5.67 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2014 Subaru Legacy?
- Yes — synthetic oil that meets the ILSAC GF-4 or GF-5, API - SAE 0W-20 Synthetic Engine Oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2014 Subaru Legacy?
- Using oil that does not meet the ILSAC GF-4 or GF-5, API - SAE 0W-20 Synthetic Engine Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.