2014 Subaru BrzOil Type & Capacity

OEM spec from the factory service manual for the Limited, Automatic Trans variant.

Quick Answer

Oil Type

$ILSAC Multigrade Engine Oil. API - SAE 0W-20 Synthetic Oil Recommended

Capacity (w/ Filter)

5.70 QTS.

5.39 L

Variant

Limited, Automatic Trans

Note: The engine oil capacity is a reference quantity to be used when changing the engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick.

This vehicle's factory manual

2014 Subaru Brz: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual
Sister site: See this spec on WhatTypeOfOil.com β€” our quick oil type & capacity lookup for every vehicle.

Related for Your 2014 Subaru Brz

Frequently Asked Questions

What type of oil does a 2014 Subaru Brz take?
The 2014 Subaru Brz requires ILSAC Multigrade Engine Oil. API - SAE 0W-20 Synthetic Oil Recommended. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the Limited, Automatic Trans configuration.
How much oil does a 2014 Subaru Brz need?
The 2014 Subaru Brz takes 5.70 QTS. (5.39 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 2014 Subaru Brz?
Yes β€” synthetic oil that meets the ILSAC Multigrade Engine Oil. API - SAE 0W-20 Synthetic Oil Recommended specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 2014 Subaru Brz?
Using oil that does not meet the ILSAC Multigrade Engine Oil. API - SAE 0W-20 Synthetic Oil Recommended specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.