Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 GMC SierraCoolant Type & Capacity
OEM spec from the factory service manual for the Base, 2D Pickup, 4.3L Eng VIN H, 4WD variant.
Quick Answer
Coolant Type
50/50 mixture of DEX-COOL and clean, drinkable water
Capacity
16.50 QTS.
15.61 L
Variant
Base, 2D Pickup, 4.3L Eng VIN H, 4WD
Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Source: Factory service manual — 2014 GMC Sierra Base, 2D Pickup, 4.3L Eng VIN H, 4WD. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of coolant does a 2014 GMC Sierra take?
- The 2014 GMC Sierra requires 50/50 mixture of DEX-COOL and clean, drinkable water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, 2D Pickup, 4.3L Eng VIN H, 4WD configuration.
- How much coolant does a 2014 GMC Sierra hold?
- The 2014 GMC Sierra cooling system capacity is 16.50 QTS. (15.61 L).
- Can I use universal coolant in my 2014 GMC Sierra?
- It is strongly recommended to use coolant that meets the 50/50 mixture of DEX-COOL and clean, drinkable water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2014 GMC Sierra?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.