2014 Ford ExpeditionOil Type & Capacity

OEM spec from the factory service manual for the EL King Ranch, 4WD variant.

Quick Answer

Oil Type

$MOTORCRAFT SAE 5W-20 Motor Oil or equivalent

Capacity (w/ Filter)

7.00 QTS.

6.62 L

Variant

EL King Ranch, 4WD

Note: The engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API certification mark for gasoline engines. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty. DO NOT use API S category oils labeled as SN, SM, SL or lower category unless the label also displays the API certification mark. These oils do not meet the requirements of the engine and emission system.

This vehicle's factory manual

2014 Ford Expedition: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual
Sister site: See this spec on WhatTypeOfOil.com β€” our quick oil type & capacity lookup for every vehicle.

Related for Your 2014 Ford Expedition

Frequently Asked Questions

What type of oil does a 2014 Ford Expedition take?
The 2014 Ford Expedition requires MOTORCRAFT SAE 5W-20 Motor Oil or equivalent. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the EL King Ranch, 4WD configuration.
How much oil does a 2014 Ford Expedition need?
The 2014 Ford Expedition takes 7.00 QTS. (6.62 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 2014 Ford Expedition?
Yes β€” synthetic oil that meets the MOTORCRAFT SAE 5W-20 Motor Oil or equivalent specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 2014 Ford Expedition?
Using oil that does not meet the MOTORCRAFT SAE 5W-20 Motor Oil or equivalent specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.