2014 Chrysler 200Coolant Type & Capacity

OEM spec from the factory service manual for the LX, 2.4L Eng VIN B, Eng CD ED3, Trans Mfr CD 40TE variant.

Quick Answer

Coolant Type

MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent

Capacity

7.70 QTS.

7.28 L

Variant

LX, 2.4L Eng VIN B, Eng CD ED3, Trans Mfr CD 40TE

Note: System fill capacity includes heater and coolant recovery bottle filled to MAX level. Chrysler Material Standard MS-12106.

This vehicle's factory manual

2014 Chrysler 200: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual
Other specs:All specs

What You'll Need

Engine Coolant / Antifreeze

MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent for Chrysler 200

Search Amazon →

Tool

Spill-Free Coolant Funnel

Search Amazon →

Tester

Coolant Tester / Hydrometer

Search Amazon →

Drain Pan

Coolant Drain Pan

Search Amazon →

Related for Your 2014 Chrysler 200

Quick Actions

🏠2014 Chrysler 200 Hub🛠️All Repair Guides🤖AI Diagnosis

Frequently Asked Questions

What type of coolant does a 2014 Chrysler 200 take?
The 2014 Chrysler 200 requires MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the LX, 2.4L Eng VIN B, Eng CD ED3, Trans Mfr CD 40TE configuration.
How much coolant does a 2014 Chrysler 200 hold?
The 2014 Chrysler 200 cooling system capacity is 7.70 QTS. (7.28 L).
Can I use universal coolant in my 2014 Chrysler 200?
It is strongly recommended to use coolant that meets the MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
What happens if I use the wrong coolant in my 2014 Chrysler 200?
Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.