Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 Chevrolet TraverseCoolant Type & Capacity
OEM spec from the factory service manual for the LS, 4D Utility variant.
Quick Answer
Coolant Type
50/50 mixture of DEX-COOL and clean, drinkable water
Capacity
11.90 QTS.
11.26 L
Variant
LS, 4D Utility
Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
This vehicle's factory manual
2014 Chevrolet Traverse: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
What You'll Need
Related for Your 2014 Chevrolet Traverse
Frequently Asked Questions
- What type of coolant does a 2014 Chevrolet Traverse take?
- The 2014 Chevrolet Traverse requires 50/50 mixture of DEX-COOL and clean, drinkable water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the LS, 4D Utility configuration.
- How much coolant does a 2014 Chevrolet Traverse hold?
- The 2014 Chevrolet Traverse cooling system capacity is 11.90 QTS. (11.26 L).
- Can I use universal coolant in my 2014 Chevrolet Traverse?
- It is strongly recommended to use coolant that meets the 50/50 mixture of DEX-COOL and clean, drinkable water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2014 Chevrolet Traverse?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.