🧪Fluid Capacities

Chevrolet Cruze Fluid Capacities

Factory manual fluid capacities for the Chevrolet Cruze. Exact capacities and specs extracted from the LEMON service manual archive.

Last updated: 2026-11-09 • Reading time: 8 min • By AllOEMManuals Editorial Team

Quick Answer

2019 Chevrolet Cruze: 2.03 OZS. (0.06 L) — PAG 46

GenerationYearsTop spec
201920192.03 OZS. (0.06 L) — PAG 46
201820182.03 OZS. (0.06 L) — PAG 46
201720172.03 OZS. (0.06 L) — PAG 46

This vehicle's factory manual

Chevrolet Cruze: choose your year, then confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual

Chevrolet Cruze maintenance schedule

Manual ReferenceFluid Capacities

Check fluid capacities information for your Chevrolet Cruze

2019 Chevrolet Cruze: 2.03 OZS. (0.06 L) — PAG 46

Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.

Find Your Vehicle

Choose your year, model and configuration before using a specification or ordering parts. The example source may describe a different vehicle or trim.

Choose your vehicle manual above to confirm the engine and specification before ordering parts.
Air Cond Compressor Oil2.03 OZS. (0.06 L) — PAG 46
Air Cond Refrigerant1.06 LBS. (0.48 KG) — R-1234yf
Automatic Transmission Fluid (Trans Mfr CD 6T35/MNU)— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3-7.4 qts.
Brake Fluid1.06 QTS. (1 L) — DOT 3 Hydraulic Brake Fluid
Engine Coolant (1.4L Eng)6.32 QTS. (5.98 L) — 50/50 mixture of DEX-COOL and clean, drinkable water
Engine Oil (1.4L Eng)4.23 QTS. (4 L) — API - SAE 0W-20 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
Fuel Tank (Gas)13.70 GALS. (51.86 L)
Windshield Washer Fluid2.65 QTS. (2.5 L) — Windshield Washer Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Automatic Transmission Fluid (Trans Mfr CD CVT250/MRG)8.80 QTS. (8.32 L) — HP CVTF
Automatic Transmission Fluid (Trans Mfr CD 9T50/M3D)— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 2.1 - 3.2 qts.
Diesel Exhaust Fluid (Diesel)3.80 GALS. (14.38 L)
Engine Coolant (1.6L Eng)6.92 QTS. (6.54 L) — 50/50 mixture of DEX-COOL and clean, drinkable water
Engine Oil (1.6L Eng)5.30 QTS. (5.01 L) — API - SAE 5W-30 Note: Use engine oils with the dexos2 certification mark. Oils meeting the requirements of the vehicle should have the dexos2 certification mark on the container. This certification mark indicates that the oil has been approved to the dexos2 specification. Use of Substitute Engine Oils if dexos2 is unavailable: In the event that dexos2-approved engine oil is not available at an oil change or for maintaining proper oil level, you may use substitute engine oil that meets ACEA C3 of the appropriate viscosity grade. In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Fuel Tank (Diesel,Hatchback)13.21 GALS. (50 L)
Fuel Tank (Diesel,Sedan)15.20 GALS. (57.53 L)
Notes
  • →Fluid Capacity is between: 4.2 - 6.3 qts.
  • →Fluid Capacity is between: 8.5 - 9.0 qts.
  • →Fluid Capacity is between: 5.3-7.4 qts.
  • →Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
  • →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
  • →Fluid Capacity is between: 5.3 - 6.3 qts.
  • →Fluid Capacity is between: 9.0 - 10 qts.
  • →Fluid Capacity is between: 2.1 - 3.2 qts.
  • →Use engine oils with the dexos2 certification mark. Oils meeting the requirements of the vehicle should have the dexos2 certification mark on the container. This certification mark indicates that the oil has been approved to the dexos2 specification. Use of Substitute Engine Oils if dexos2 is unavailable: In the event that dexos2-approved engine oil is not available at an oil change or for maintaining proper oil level, you may use substitute engine oil that meets ACEA C3 of the appropriate viscosity grade. In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Air Cond Compressor Oil2.03 OZS. (0.06 L) — PAG 46
Air Cond Refrigerant1.06 LBS. (0.48 KG) — R-1234yf
Brake Fluid1.06 QTS. (1 L) — DOT 3 Hydraulic Brake Fluid
Engine Coolant (1.4L Eng)6.32 QTS. (5.98 L) — 50/50 mixture of DEX-COOL and clean, drinkable water
Engine Oil (1.4L Eng)4.23 QTS. (4 L) — API - SAE 0W-20 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
Fuel Tank (Gas)13.70 GALS. (51.86 L)
Manual Transmission Fluid1.86 QTS. (1.76 L) — Manual Transmission Fluid Note: GM Part No. 19259104.
Windshield Washer Fluid2.65 QTS. (2.5 L) — Windshield Washer Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Automatic Transmission Fluid (Trans Mfr CD 6T35/MNU)— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3-7.4 qts.
Automatic Transmission Fluid (Trans Mfr CD 9T50/M3D)— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 2.1 - 3.2 qts.
Diesel Exhaust Fluid (Diesel)3.80 GALS. (14.38 L)
Engine Coolant (1.6L Eng)6.92 QTS. (6.54 L) — 50/50 mixture of DEX-COOL and clean, drinkable water
Engine Oil (1.6L Eng)5.30 QTS. (5.01 L) — API - SAE 5W-30 Note: Use engine oils with the dexos2 certification mark. Oils meeting the requirements of the vehicle should have the dexos2 certification mark on the container. This certification mark indicates that the oil has been approved to the dexos2 specification. Use of Substitute Engine Oils if dexos2 is unavailable: In the event that dexos2-approved engine oil is not available at an oil change or for maintaining proper oil level, you may use substitute engine oil that meets ACEA C3 of the appropriate viscosity grade. In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Fuel Tank (Diesel,Hatchback)13.21 GALS. (50 L)
Fuel Tank (Diesel,Sedan)15.20 GALS. (57.53 L)
Notes
  • →Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
  • →GM Part No. 19259104.
  • →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
  • →Fluid Capacity is between: 4.2 - 6.3 qts.
  • →Fluid Capacity is between: 8.5 - 9.0 qts.
  • →Fluid Capacity is between: 5.3-7.4 qts.
  • →Fluid Capacity is between: 5.3 - 6.3 qts.
  • →Fluid Capacity is between: 9.0 - 10 qts.
  • →Fluid Capacity is between: 2.1 - 3.2 qts.
  • →Use engine oils with the dexos2 certification mark. Oils meeting the requirements of the vehicle should have the dexos2 certification mark on the container. This certification mark indicates that the oil has been approved to the dexos2 specification. Use of Substitute Engine Oils if dexos2 is unavailable: In the event that dexos2-approved engine oil is not available at an oil change or for maintaining proper oil level, you may use substitute engine oil that meets ACEA C3 of the appropriate viscosity grade. In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Air Cond Compressor Oil2.03 OZS. (0.06 L) — PAG 46
Air Cond Refrigerant1.15 LBS. (0.52 KG) — R-134a
Brake Fluid1.06 QTS. (1 L) — DOT 3 Hydraulic Brake Fluid
Engine Coolant (1.4L Eng)6.32 QTS. (5.98 L) — 50/50 mixture of DEX-COOL and clean, drinkable water
Engine Oil (1.4L Eng)4.20 QTS. (3.97 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Fuel Tank (Gas)13.70 GALS. (51.86 L)
Manual Transmission Fluid1.86 QTS. (1.76 L) — Manual Transmission Fluid Note: GM Part No. 19259104.
Windshield Washer Fluid2.65 QTS. (2.5 L) — Windshield Washer Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Automatic Transmission Fluid (Trans Mfr CD 6T35/MNU)— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3-7.4 qts.
Automatic Transmission Fluid (Trans Mfr CD 9T50/M3D)— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 2.1 - 3.2 qts.
Diesel Exhaust Fluid (Diesel)3.80 GALS. (14.38 L)
Engine Coolant (1.6L Eng)6.92 QTS. (6.54 L) — 50/50 mixture of DEX-COOL and clean, drinkable water
Engine Oil (1.6L Eng)5.30 QTS. (5.01 L) — API - SAE 5W-30 Note: Use engine oils with the dexos2 certification mark. Oils meeting the requirements of the vehicle should have the dexos2 certification mark on the container. This certification mark indicates that the oil has been approved to the dexos2 specification. Use of Substitute Engine Oils if dexos2 is unavailable: In the event that dexos2-approved engine oil is not available at an oil change or for maintaining proper oil level, you may use substitute engine oil that meets ACEA C3 of the appropriate viscosity grade. In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Fuel Tank (Diesel)13.50 GALS. (51.1 L)
Notes
  • →Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
  • →GM Part No. 19259104.
  • →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
  • →Fluid Capacity is between: 4.2 - 6.3 qts.
  • →Fluid Capacity is between: 8.5 - 9.0 qts.
  • →Fluid Capacity is between: 5.3-7.4 qts.
  • →Fluid Capacity is between: 5.3 - 6.3 qts.
  • →Fluid Capacity is between: 9.0 - 10 qts.
  • →Fluid Capacity is between: 2.1 - 3.2 qts.
  • →Use engine oils with the dexos2 certification mark. Oils meeting the requirements of the vehicle should have the dexos2 certification mark on the container. This certification mark indicates that the oil has been approved to the dexos2 specification. Use of Substitute Engine Oils if dexos2 is unavailable: In the event that dexos2-approved engine oil is not available at an oil change or for maintaining proper oil level, you may use substitute engine oil that meets ACEA C3 of the appropriate viscosity grade. In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Air Cond Compressor Oil4.30 OZS. (0.12 L) — PAG 46
Air Cond Refrigerant1.40 LBS. (0.63 KG) — R-134a
Automatic Transmission Fluid— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3-7.4 qts.
Brake Fluid1.06 QTS. (1 L) — DOT 3 Hydraulic Brake Fluid
Engine Coolant7.50 QTS. (7.09 L) — 50/50 mixture of DEX-COOL and clean, drinkable water
Engine Oil4.25 QTS. (4.02 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Fuel Tank12.60 GALS. (47.69 L)
Manual Transmission Fluid1.90 QTS. (1.79 L) — Manual Transmission Fluid Note: GM Part No. 19259104.
Windshield Washer Fluid2.65 QTS. (2.5 L) — Windshield Washer Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Automatic Transmission Fluid (1.8L Eng)— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 4.2 - 5.3 qts.
Engine Coolant (1.8L Eng)5.92 QTS. (5.6 L) — 50/50 mixture of DEX-COOL and clean, drinkable water
Engine Oil (1.8L Eng)4.67 QTS. (4.41 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Automatic Transmission Fluid (1.4L Eng)— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3-7.4 qts.
Engine Coolant (1.4L Eng)6.60 QTS. (6.24 L) — 50/50 mixture of DEX-COOL and clean, drinkable water
Engine Oil (1.4L Eng)4.25 QTS. (4.02 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Notes
  • →Fluid Capacity is between: 4.2 - 6.3 qts.
  • →Fluid Capacity is between: 8.5 - 9.0 qts.
  • →Fluid Capacity is between: 5.3-7.4 qts.
  • →Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
  • →GM Part No. 19259104.
  • →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
  • →Fluid Capacity is between: 4.75 - 5.8 qts.
  • →Fluid Capacity is between: 4.2 - 5.3 qts.
Air Cond Compressor Oil4.30 OZS. (0.12 L) — PAG 46
Air Cond Refrigerant1.40 LBS. (0.63 KG) — R-134a
Automatic Transmission Fluid (2.0L Eng)7.40 QTS. (7 L) — Automatic Transmission Fluid AW-1
Brake Fluid1.06 QTS. (1 L) — DOT 3 Hydraulic Brake Fluid
Diesel Exhaust Fluid (2.0L Eng)4.90 GALS. (18.54 L) — Diesel Exhaut Fluid that meets ISO 22241-1or displays the API Diesel Exhaut Fluid Certification Mark
Engine Coolant (2.0L Eng)8.78 QTS. (8.3 L) — 50/50 mixture of DEX-COOL and clean, drinkable water
Engine Oil (2.0L Eng)4.67 QTS. (4.41 L) — API - SAE 5W-30 Note: Use engine oils with the dexos2 certification mark. Oils meeting the requirements of the vehicle should have the dexos2 certification mark on the container. This certification mark indicates that the oil has been approved to the dexos2 specification. Use of Substitute Engine Oils if dexos2 is unavailable: In the event that dexos2-approved engine oil is not available at an oil change or for maintaining proper oil level, you may use substitute engine oil that meets ACEA C3 of the appropriate viscosity grade. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Fuel Tank12.60 GALS. (47.69 L)
Manual Transmission Fluid1.90 QTS. (1.79 L) — Manual Transmission Fluid Note: GM Part No. 19259104.
Windshield Washer Fluid2.65 QTS. (2.5 L) — Windshield Washer Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Automatic Transmission Fluid (1.8L Eng)— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 4.2 - 5.3 qts.
Engine Coolant (1.8L Eng)5.92 QTS. (5.6 L) — 50/50 mixture of DEX-COOL and clean, drinkable water
Engine Oil (1.8L Eng)4.67 QTS. (4.41 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Automatic Transmission Fluid (1.4L Eng)— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3-7.4 qts.
Engine Coolant (1.4L Eng)6.60 QTS. (6.24 L) — 50/50 mixture of DEX-COOL and clean, drinkable water
Engine Oil (1.4L Eng)4.25 QTS. (4.02 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Notes
  • →Use engine oils with the dexos2 certification mark. Oils meeting the requirements of the vehicle should have the dexos2 certification mark on the container. This certification mark indicates that the oil has been approved to the dexos2 specification. Use of Substitute Engine Oils if dexos2 is unavailable: In the event that dexos2-approved engine oil is not available at an oil change or for maintaining proper oil level, you may use substitute engine oil that meets ACEA C3 of the appropriate viscosity grade. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
  • →GM Part No. 19259104.
  • →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
  • →Fluid Capacity is between: 4.75 - 5.8 qts.
  • →Fluid Capacity is between: 4.2 - 5.3 qts.
  • →Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
  • →Fluid Capacity is between: 4.2 - 6.3 qts.
  • →Fluid Capacity is between: 8.5 - 9.0 qts.
  • →Fluid Capacity is between: 5.3-7.4 qts.

Search for fluids

Choose the fluid you need. Check your vehicle, service procedure and manufacturer specification before buying; search results are not verified matches.

As an Amazon Associate, AllOEMManuals earns from qualifying purchases.

Fluids — Manual's Parts List

Everything for a full fluid service weekend.

Vehicle-Scoped Amazon Search

Opens Amazon with Chevrolet Cruze prefilled so you can confirm fitment and avoid wrong parts.

Search Amazon; check fitment

Get everything at once

Search results vary; confirm each item and its fitment before buying.

See All on Amazon

Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.

One-Trip Shopping List

Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.

Frequently Asked Questions

Where is this data from?
Extracted directly from the LEMON factory service manual archive. Sources are cited per generation.
What fluid capacities does a Chevrolet Cruze use?
2019 Chevrolet Cruze: 2.03 OZS. (0.06 L) — PAG 46
Why do fluid capacities vary by generation for the Chevrolet Cruze?
Different engine options, transmission types, and cooling system designs across model years change total fluid volumes. Always use the capacity listed for your exact year and engine code — do not guess across generations.

Find your service manual

Select your vehicle and check the available manual sections for your exact configuration.

Author & Review

Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.

Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.

Last updated: 2026-11-09

Need a full step-by-step repair guide?

Start Free AI Diagnosis →

100% Free — No signup required