2014 BMW X5Oil Type & Capacity

OEM spec from the factory service manual for the sDrive35i variant.

Quick Answer

Oil Type

CASTROL Syntec European Formula SAE 0W-30, MOBIL SAE 0W-40, PENNZOIL Platinum European Formula Ultra SAE 5W-30, VALVOLINE SynPower SAE 5W-30

Capacity (w/ Filter)

6.90 QTS.

6.52 L

Variant

sDrive35i

Note: The choice of the right SAE grade is based on the climatic conditions in the region in which the vehicle is normally driven. BMW recommends BMW High Performance 5W-30 Synthetic Oil (BMW part number 07 51 0 017 866) for regular scheduled engine oil changes.
Source: Factory service manual β€” 2014 BMW X5 sDrive35i. View full manual section β†’

Frequently Asked Questions

What type of oil does a 2014 BMW X5 take?
The 2014 BMW X5 requires CASTROL Syntec European Formula SAE 0W-30, MOBIL SAE 0W-40, PENNZOIL Platinum European Formula Ultra SAE 5W-30, VALVOLINE SynPower SAE 5W-30. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the sDrive35i configuration.
How much oil does a 2014 BMW X5 need?
The 2014 BMW X5 takes 6.90 QTS. (6.52 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 2014 BMW X5?
Yes β€” synthetic oil that meets the CASTROL Syntec European Formula SAE 0W-30, MOBIL SAE 0W-40, PENNZOIL Platinum European Formula Ultra SAE 5W-30, VALVOLINE SynPower SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 2014 BMW X5?
Using oil that does not meet the CASTROL Syntec European Formula SAE 0W-30, MOBIL SAE 0W-40, PENNZOIL Platinum European Formula Ultra SAE 5W-30, VALVOLINE SynPower SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.