Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 Audi S5Coolant Type & Capacity
OEM spec from the factory service manual for the Premium Plus, 2D Convertible variant.
Quick Answer
Coolant Type
G13 TL-VW774J
Capacity
11.70 QTS.
11.07 L
Variant
Premium Plus, 2D Convertible
Note: Dilute with distilled water.
This vehicle's factory manual
2014 Audi S5: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 2014 Audi S5
Quick Actions
Frequently Asked Questions
- What type of coolant does a 2014 Audi S5 take?
- The 2014 Audi S5 requires G13 TL-VW774J. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Premium Plus, 2D Convertible configuration.
- How much coolant does a 2014 Audi S5 hold?
- The 2014 Audi S5 cooling system capacity is 11.70 QTS. (11.07 L).
- Can I use universal coolant in my 2014 Audi S5?
- It is strongly recommended to use coolant that meets the G13 TL-VW774J specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2014 Audi S5?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.