Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 Acura IlxCoolant Type & Capacity
OEM spec from the factory service manual for the Base, 2.0L Eng variant.
Quick Answer
Coolant Type
50/50 mix of HONDA Long-Life Antifreeze/Coolant Type2 and distilled water
Capacity
1.41 GALS.
5.33 L
Variant
Base, 2.0L Eng
Note: Change including the remaining 0.125 US gal. (0.475 l) in the reserve tank.
This vehicle's factory manual
2014 Acura Ilx: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 2014 Acura Ilx
Quick Actions
Frequently Asked Questions
- What type of coolant does a 2014 Acura Ilx take?
- The 2014 Acura Ilx requires 50/50 mix of HONDA Long-Life Antifreeze/Coolant Type2 and distilled water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, 2.0L Eng configuration.
- How much coolant does a 2014 Acura Ilx hold?
- The 2014 Acura Ilx cooling system capacity is 1.41 GALS. (5.33 L).
- Can I use universal coolant in my 2014 Acura Ilx?
- It is strongly recommended to use coolant that meets the 50/50 mix of HONDA Long-Life Antifreeze/Coolant Type2 and distilled water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2014 Acura Ilx?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.