2013 Lincoln MkzOil Type & Capacity

OEM spec from the factory service manual for the Base, 2.0L Eng VIN 9, AWD variant.

Quick Answer

Oil Type

$MOTORCRAFT SAE 5W-30 Motor Oil or equivalent

Capacity (w/ Filter)

5.70 QTS.

5.39 L

Variant

Base, 2.0L Eng VIN 9, AWD

Note: Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil must meet or exceed the requirements of Ford specification WSS-M2C946-A, SAE 5W-30 (2.0L engine) or WSS-M2C945-A, SAE 5W-20 (3.7L engine) and display the API Starburst Certification Mark. If the Ford specification is not shown on the oil container, the oil container must display the API Starburst Certification Mark and the correct viscosity.

This vehicle's factory manual

2013 Lincoln Mkz: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual
Sister site: See this spec on WhatTypeOfOil.com β€” our quick oil type & capacity lookup for every vehicle.
Other specs:All specs

Related for Your 2013 Lincoln Mkz

Frequently Asked Questions

What type of oil does a 2013 Lincoln Mkz take?
The 2013 Lincoln Mkz requires MOTORCRAFT SAE 5W-30 Motor Oil or equivalent. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the Base, 2.0L Eng VIN 9, AWD configuration.
How much oil does a 2013 Lincoln Mkz need?
The 2013 Lincoln Mkz takes 5.70 QTS. (5.39 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 2013 Lincoln Mkz?
Yes β€” synthetic oil that meets the MOTORCRAFT SAE 5W-30 Motor Oil or equivalent specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 2013 Lincoln Mkz?
Using oil that does not meet the MOTORCRAFT SAE 5W-30 Motor Oil or equivalent specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.