Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2013 Lexus IsOil Type & Capacity
OEM spec from the factory service manual for the Base, AWD variant.
Quick Answer
Oil Type
$TOYOTA Genuine Motor Oil. API - SAE 0W-20
Capacity (w/ Filter)
6.70 QTS.
6.34 L
Variant
Base, AWD
Note: SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change.
The fluid capacity is the quantity of reference.
This vehicle's factory manual
The oil spec is above. This opens the fluids section of the 2013 Lexus Is Base, AWD factory book.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 2013 Lexus Is
Quick Actions
Frequently Asked Questions
- What type of oil does a 2013 Lexus Is take?
- The 2013 Lexus Is requires TOYOTA Genuine Motor Oil. API - SAE 0W-20. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, AWD configuration.
- How much oil does a 2013 Lexus Is need?
- The 2013 Lexus Is takes 6.70 QTS. (6.34 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2013 Lexus Is?
- Yes — synthetic oil that meets the TOYOTA Genuine Motor Oil. API - SAE 0W-20 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2013 Lexus Is?
- Using oil that does not meet the TOYOTA Genuine Motor Oil. API - SAE 0W-20 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.