How much coolant does a 2013 Lexus Is hold?

The 2013 Lexus Is cooling system capacity is 10.90 QTS. (10.31 L).

What happens if I use the wrong coolant in my 2013 Lexus Is?

Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.

Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2013 Lexus IsCoolant Type & Capacity

OEM spec from the factory service manual for the Base, AWD variant.

Quick Answer

Coolant Type

TOYOTA Super Long Life Coolant or Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology

Capacity

10.90 QTS.

10.31 L

Variant

Base, AWD

Note: DO NOT use plain water alone.

This vehicle's factory manual

2013 Lexus Is: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual

Other specs:All specs

What You'll Need

Engine Coolant / Antifreeze

TOYOTA Super Long Life Coolant or Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology for Lexus Is

Search Amazon →

Tool

Related for Your 2013 Lexus Is

Quick Actions

🏠2013 Lexus Is Hub 🛠️All Repair Guides 🤖AI Diagnosis

Frequently Asked Questions

What type of coolant does a 2013 Lexus Is take?: The 2013 Lexus Is requires TOYOTA Super Long Life Coolant or Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, AWD configuration.
How much coolant does a 2013 Lexus Is hold?: The 2013 Lexus Is cooling system capacity is 10.90 QTS. (10.31 L).
Can I use universal coolant in my 2013 Lexus Is?: It is strongly recommended to use coolant that meets the TOYOTA Super Long Life Coolant or Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
What happens if I use the wrong coolant in my 2013 Lexus Is?: Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.