Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2013 Ford FusionOil Type & Capacity
OEM spec from the factory service manual for the SE, 1.6L Eng VIN R, Automatic Trans variant.
Quick Answer
Oil Type
MOTORCRAFT SAE 5W-20 Premium Synthetic Blend, SAE 5W-20 Full Synthetic Motor Oil
Capacity (w/ Filter)
4.30 QTS.
4.06 L
Variant
SE, 1.6L Eng VIN R, Automatic Trans
Note: Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only to meet the requirements of FORD specification WSS-M2C945-A and the API certification mark.
Source: Factory service manual — 2013 Ford Fusion SE, 1.6L Eng VIN R, Automatic Trans. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2013 Ford Fusion take?
- The 2013 Ford Fusion requires MOTORCRAFT SAE 5W-20 Premium Synthetic Blend, SAE 5W-20 Full Synthetic Motor Oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the SE, 1.6L Eng VIN R, Automatic Trans configuration.
- How much oil does a 2013 Ford Fusion need?
- The 2013 Ford Fusion takes 4.30 QTS. (4.06 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2013 Ford Fusion?
- Yes — synthetic oil that meets the MOTORCRAFT SAE 5W-20 Premium Synthetic Blend, SAE 5W-20 Full Synthetic Motor Oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2013 Ford Fusion?
- Using oil that does not meet the MOTORCRAFT SAE 5W-20 Premium Synthetic Blend, SAE 5W-20 Full Synthetic Motor Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.