2013 Ford C-maxOil Type & Capacity

OEM spec from the factory service manual for the Energi variant.

Quick Answer

Oil Type

$MOTORCRAFT SAE 5W-20 Premuim Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil

Capacity (w/ Filter)

4.50 QTS.

4.25 L

Variant

Energi

Note: Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the requirements of Ford specification WSS-M2C945-A, SAE 5W-20, GF5, and display the API Certification Mark. Your engine has been designed to be used with Ford engine oil, which gives a fuel economy benefit while maintaining the durability of your engine. Using oils other than the one specified can result in longer engine cranking periods, reduced engine performance, reduced fuel economy and increased emission levels.

This vehicle's factory manual

2013 Ford C-max: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual
Sister site: See this spec on WhatTypeOfOil.com β€” our quick oil type & capacity lookup for every vehicle.

Related for Your 2013 Ford C-max

Frequently Asked Questions

What type of oil does a 2013 Ford C-max take?
The 2013 Ford C-max requires MOTORCRAFT SAE 5W-20 Premuim Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the Energi configuration.
How much oil does a 2013 Ford C-max need?
The 2013 Ford C-max takes 4.50 QTS. (4.25 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 2013 Ford C-max?
Yes β€” synthetic oil that meets the MOTORCRAFT SAE 5W-20 Premuim Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 2013 Ford C-max?
Using oil that does not meet the MOTORCRAFT SAE 5W-20 Premuim Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.