Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2013 Fiat 500Oil Type & Capacity
OEM spec from the factory service manual for the Sport, 1.4L Eng VIN H variant.
Quick Answer
Oil Type
MOPAR API SAE 5W-40 Full Synthetic Engine Oil, meeting the requirements of Chrysler Group LLC Material Standard MS-10896
Capacity (w/ Filter)
4.00 QTS.
3.78 L
Variant
Sport, 1.4L Eng VIN H
Source: Factory service manual — 2013 Fiat 500 Sport, 1.4L Eng VIN H. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2013 Fiat 500 take?
- The 2013 Fiat 500 requires MOPAR API SAE 5W-40 Full Synthetic Engine Oil, meeting the requirements of Chrysler Group LLC Material Standard MS-10896. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Sport, 1.4L Eng VIN H configuration.
- How much oil does a 2013 Fiat 500 need?
- The 2013 Fiat 500 takes 4.00 QTS. (3.78 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2013 Fiat 500?
- Yes — synthetic oil that meets the MOPAR API SAE 5W-40 Full Synthetic Engine Oil, meeting the requirements of Chrysler Group LLC Material Standard MS-10896 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2013 Fiat 500?
- Using oil that does not meet the MOPAR API SAE 5W-40 Full Synthetic Engine Oil, meeting the requirements of Chrysler Group LLC Material Standard MS-10896 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.