Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2013 Chevrolet ExpressOil Type & Capacity
OEM spec from the factory service manual for the G1500, Van Cargo, 4.3L Eng VIN X variant.
Quick Answer
Oil Type
$API - SAE 5W-30
Capacity (w/ Filter)
4.50 QTS.
4.25 L
Variant
G1500, Van Cargo, 4.3L Eng VIN X
Note: The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50.
Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
This vehicle's factory manual
2013 Chevrolet Express: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 2013 Chevrolet Express
Frequently Asked Questions
- What type of oil does a 2013 Chevrolet Express take?
- The 2013 Chevrolet Express requires API - SAE 5W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the G1500, Van Cargo, 4.3L Eng VIN X configuration.
- How much oil does a 2013 Chevrolet Express need?
- The 2013 Chevrolet Express takes 4.50 QTS. (4.25 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2013 Chevrolet Express?
- Yes — synthetic oil that meets the API - SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2013 Chevrolet Express?
- Using oil that does not meet the API - SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.