Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2013 BMW M5Oil Type & Capacity
OEM spec from the factory service manual for the 4.4L Eng VIN C, Automatic DCT Trans variant.
Quick Answer
Oil Type
SAE 0W-30 or SAE 0W-40 Alternatively, also engine oils SAE 5W-30 or SAE 5W-40 may be used.
Capacity (w/ Filter)
9.00 QTS.
8.51 L
Variant
4.4L Eng VIN C, Automatic DCT Trans
Source: Factory service manual — 2013 BMW M5 4.4L Eng VIN C, Automatic DCT Trans. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2013 BMW M5 take?
- The 2013 BMW M5 requires SAE 0W-30 or SAE 0W-40 Alternatively, also engine oils SAE 5W-30 or SAE 5W-40 may be used.. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 4.4L Eng VIN C, Automatic DCT Trans configuration.
- How much oil does a 2013 BMW M5 need?
- The 2013 BMW M5 takes 9.00 QTS. (8.51 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2013 BMW M5?
- Yes — synthetic oil that meets the SAE 0W-30 or SAE 0W-40 Alternatively, also engine oils SAE 5W-30 or SAE 5W-40 may be used. specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2013 BMW M5?
- Using oil that does not meet the SAE 0W-30 or SAE 0W-40 Alternatively, also engine oils SAE 5W-30 or SAE 5W-40 may be used. specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.