Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Volvo Xc90Oil Type & Capacity
OEM spec from the factory service manual for the Base, AWD variant.
Quick Answer
Oil Type
$ILSAC, GF-4, API - SL, or ACEA A1/B1, SAE 5W-30
Capacity (w/ Filter)
7.18 QTS.
6.79 L
Variant
Base, AWD
Note: Synthetic oils meeting SAE 0W-30 or 0W-40 and complying with oil quality requirements are recommended for driving in areas of sustained temperature extremes (hot or cold), when towing a trailer over long distances and for prolonged driving in mountainous areas.
This vehicle's factory manual
2012 Volvo Xc90: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 2012 Volvo Xc90
Quick Actions
Frequently Asked Questions
- What type of oil does a 2012 Volvo Xc90 take?
- The 2012 Volvo Xc90 requires ILSAC, GF-4, API - SL, or ACEA A1/B1, SAE 5W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, AWD configuration.
- How much oil does a 2012 Volvo Xc90 need?
- The 2012 Volvo Xc90 takes 7.18 QTS. (6.79 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2012 Volvo Xc90?
- Yes — synthetic oil that meets the ILSAC, GF-4, API - SL, or ACEA A1/B1, SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2012 Volvo Xc90?
- Using oil that does not meet the ILSAC, GF-4, API - SL, or ACEA A1/B1, SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.