Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Volvo C30Oil Type & Capacity
OEM spec from the factory service manual for the T-5 R-Design, Automatic Trans variant.
Quick Answer
Oil Type
ILSAC, GF-4, API - SL, or ACEA A1/B1, SAE 5W-30
Capacity (w/ Filter)
6.10 QTS.
5.77 L
Variant
T-5 R-Design, Automatic Trans
Note: Synthetic oils meeting SAE 0W-30 or 0W-40 and complying with oil quality requirements are recommended for driving in areas of sustained temperature extremes (hot or cold), when towing a trailer over long distances and for prolonged driving in mountainous areas.
Source: Factory service manual — 2012 Volvo C30 T-5 R-Design, Automatic Trans. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2012 Volvo C30 take?
- The 2012 Volvo C30 requires ILSAC, GF-4, API - SL, or ACEA A1/B1, SAE 5W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the T-5 R-Design, Automatic Trans configuration.
- How much oil does a 2012 Volvo C30 need?
- The 2012 Volvo C30 takes 6.10 QTS. (5.77 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2012 Volvo C30?
- Yes — synthetic oil that meets the ILSAC, GF-4, API - SL, or ACEA A1/B1, SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2012 Volvo C30?
- Using oil that does not meet the ILSAC, GF-4, API - SL, or ACEA A1/B1, SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.