2012 Toyota TacomaCoolant Type & Capacity

OEM spec from the factory service manual for the Base, 4D Pickup Extra Cab, 2.7L Eng VIN X, 4WD, Automatic Trans variant.

Quick Answer

Coolant Type

TOYOTA Super Long Life Coolant or similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrate and non-borate coolant with long-life hybrid organic acid technology

Capacity

9.10 QTS.

8.61 L

Variant

Base, 4D Pickup Extra Cab, 2.7L Eng VIN X, 4WD, Automatic Trans

Note: DO NOT use plain water alone. The fluid capacity is the quantity of reference.

This vehicle's factory manual

2012 Toyota Tacoma: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual

Related for Your 2012 Toyota Tacoma

Frequently Asked Questions

What type of coolant does a 2012 Toyota Tacoma take?
The 2012 Toyota Tacoma requires TOYOTA Super Long Life Coolant or similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrate and non-borate coolant with long-life hybrid organic acid technology. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the Base, 4D Pickup Extra Cab, 2.7L Eng VIN X, 4WD, Automatic Trans configuration.
How much coolant does a 2012 Toyota Tacoma hold?
The 2012 Toyota Tacoma cooling system capacity is 9.10 QTS. (8.61 L).
Can I use universal coolant in my 2012 Toyota Tacoma?
It is strongly recommended to use coolant that meets the TOYOTA Super Long Life Coolant or similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrate and non-borate coolant with long-life hybrid organic acid technology specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
What happens if I use the wrong coolant in my 2012 Toyota Tacoma?
Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.