Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Toyota AvalonOil Type & Capacity
OEM spec from the factory service manual for the Base variant.
Quick Answer
Oil Type
$TOYOTA Genuine Motor Oil SAE 5W-30 or equivalent ILSAC multigrade oil
Capacity (w/ Filter)
6.40 QTS.
6.05 L
Variant
Base
Note: SAE 5W-30 is the best choice for good fuel economy and good starting in cold weather. If SAE 5W-30 is not available, SAE 10W-30 oil may be used. However, it should be replaced with SAE 5W-30 at the next oil change.
This vehicle's factory manual
2012 Toyota Avalon: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2012 Toyota Avalon
Frequently Asked Questions
- What type of oil does a 2012 Toyota Avalon take?
- The 2012 Toyota Avalon requires TOYOTA Genuine Motor Oil SAE 5W-30 or equivalent ILSAC multigrade oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base configuration.
- How much oil does a 2012 Toyota Avalon need?
- The 2012 Toyota Avalon takes 6.40 QTS. (6.05 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2012 Toyota Avalon?
- Yes — synthetic oil that meets the TOYOTA Genuine Motor Oil SAE 5W-30 or equivalent ILSAC multigrade oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2012 Toyota Avalon?
- Using oil that does not meet the TOYOTA Genuine Motor Oil SAE 5W-30 or equivalent ILSAC multigrade oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.