Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Scion xBOil Type & Capacity
OEM spec from the factory service manual for the Automatic Trans variant.
Quick Answer
Oil Type
ILSAC SAE 5W-20, 0W-20
Capacity (w/ Filter)
4.50 QTS.
4.25 L
Variant
Automatic Trans
Note: SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather.
Source: Factory service manual — 2012 Scion xB Automatic Trans. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2012 Scion xB take?
- The 2012 Scion xB requires ILSAC SAE 5W-20, 0W-20. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Automatic Trans configuration.
- How much oil does a 2012 Scion xB need?
- The 2012 Scion xB takes 4.50 QTS. (4.25 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2012 Scion xB?
- Yes — synthetic oil that meets the ILSAC SAE 5W-20, 0W-20 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2012 Scion xB?
- Using oil that does not meet the ILSAC SAE 5W-20, 0W-20 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.