Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Mitsubishi LancerOil Type & Capacity
OEM spec from the factory service manual for the DE variant.
Quick Answer
Oil Type
$ILSAC, API - SAE 0W-20
Capacity (w/ Filter)
4.52 QTS.
4.27 L
Variant
DE
Note: SAE 0W-20 engine oil is strongly recommended for optimum fuel economy and cold starting. If it's not available the ILSAC certification oil of other viscosity grades can be used temporarily.
This vehicle's factory manual
2012 Mitsubishi Lancer: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 2012 Mitsubishi Lancer
Frequently Asked Questions
- What type of oil does a 2012 Mitsubishi Lancer take?
- The 2012 Mitsubishi Lancer requires ILSAC, API - SAE 0W-20. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the DE configuration.
- How much oil does a 2012 Mitsubishi Lancer need?
- The 2012 Mitsubishi Lancer takes 4.52 QTS. (4.27 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2012 Mitsubishi Lancer?
- Yes — synthetic oil that meets the ILSAC, API - SAE 0W-20 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2012 Mitsubishi Lancer?
- Using oil that does not meet the ILSAC, API - SAE 0W-20 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.