Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Mitsubishi GalantOil Type & Capacity
OEM spec from the factory service manual for the ES variant.
Quick Answer
Oil Type
$ILSAC, API - SAE 5W-20
Capacity (w/ Filter)
4.52 QTS.
4.27 L
Variant
ES
Note: SAE 5W-20 engine oil is strongly recommended for optimum fuel economy and cold starting. If it's not available the ILSAC certification oil of other viscosity grades can be used temporarily.
This vehicle's factory manual
2012 Mitsubishi Galant: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 2012 Mitsubishi Galant
Frequently Asked Questions
- What type of oil does a 2012 Mitsubishi Galant take?
- The 2012 Mitsubishi Galant requires ILSAC, API - SAE 5W-20. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the ES configuration.
- How much oil does a 2012 Mitsubishi Galant need?
- The 2012 Mitsubishi Galant takes 4.52 QTS. (4.27 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2012 Mitsubishi Galant?
- Yes — synthetic oil that meets the ILSAC, API - SAE 5W-20 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2012 Mitsubishi Galant?
- Using oil that does not meet the ILSAC, API - SAE 5W-20 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.