Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Mercedes-Benz SprinterCoolant Type & Capacity
OEM spec from the factory service manual for the 2500, Van Cargo variant.
Quick Answer
Coolant Type
MB 325.0 Anticorrosion/Antifreeze
Capacity
10.75 QTS.
10.17 L
Variant
2500, Van Cargo
Note: When the coolant is being renewed, the coolant must contain 50 % by volume of anticorrosion/antifreeze agent. This is equivalent to antifreeze protection down to -34.6F. Do not exceed a ratio of 55 % by volume (antifreeze protection down to approximately -49.0F). Heat dissipation is otherwise insufficient. Observe the MB Specifications for Service Products, Sheet No. 310.1.
This vehicle's factory manual
2012 Mercedes-Benz Sprinter: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 2012 Mercedes-Benz Sprinter
Frequently Asked Questions
- What type of coolant does a 2012 Mercedes-Benz Sprinter take?
- The 2012 Mercedes-Benz Sprinter requires MB 325.0 Anticorrosion/Antifreeze. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 2500, Van Cargo configuration.
- How much coolant does a 2012 Mercedes-Benz Sprinter hold?
- The 2012 Mercedes-Benz Sprinter cooling system capacity is 10.75 QTS. (10.17 L).
- Can I use universal coolant in my 2012 Mercedes-Benz Sprinter?
- It is strongly recommended to use coolant that meets the MB 325.0 Anticorrosion/Antifreeze specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2012 Mercedes-Benz Sprinter?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.