Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Mazda Cx-7Oil Type & Capacity
OEM spec from the factory service manual for the i SV, 2.5L Eng VIN 5 variant.
Quick Answer
Oil Type
$API - SM or ILSAC, SAE 0W-20 Engine Oil
Capacity (w/ Filter)
5.30 QTS.
5.01 L
Variant
i SV, 2.5L Eng VIN 5
This vehicle's factory manual
The oil spec is above. This opens the fluids section of the 2012 Mazda Cx-7 i SV, 2.5L Eng VIN 5 factory book.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2012 Mazda Cx-7
Maintenance Specs
Quick Actions
Frequently Asked Questions
- What type of oil does a 2012 Mazda Cx-7 take?
- The 2012 Mazda Cx-7 requires API - SM or ILSAC, SAE 0W-20 Engine Oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the i SV, 2.5L Eng VIN 5 configuration.
- How much oil does a 2012 Mazda Cx-7 need?
- The 2012 Mazda Cx-7 takes 5.30 QTS. (5.01 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2012 Mazda Cx-7?
- Yes — synthetic oil that meets the API - SM or ILSAC, SAE 0W-20 Engine Oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2012 Mazda Cx-7?
- Using oil that does not meet the API - SM or ILSAC, SAE 0W-20 Engine Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.