Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Land Rover Lr2Coolant Type & Capacity
OEM spec from the factory service manual for the Base variant.
Quick Answer
Coolant Type
50/50 mixture of TEXACO XLC Antifreeze and Water
Capacity
6.85 QTS.
6.48 L
Variant
Base
Note: Capacities are approximate and provided as a guide only. All oil levels must be checked using the dipstick, level plugs or driver information module, as applicable.
This vehicle's factory manual
2012 Land Rover Lr2: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 2012 Land Rover Lr2
Frequently Asked Questions
- What type of coolant does a 2012 Land Rover Lr2 take?
- The 2012 Land Rover Lr2 requires 50/50 mixture of TEXACO XLC Antifreeze and Water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base configuration.
- How much coolant does a 2012 Land Rover Lr2 hold?
- The 2012 Land Rover Lr2 cooling system capacity is 6.85 QTS. (6.48 L).
- Can I use universal coolant in my 2012 Land Rover Lr2?
- It is strongly recommended to use coolant that meets the 50/50 mixture of TEXACO XLC Antifreeze and Water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2012 Land Rover Lr2?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.