2012 Jeep LibertyOil Type & Capacity

OEM spec from the factory service manual for the Limited Jet, 4WD, Automatic variant.

Quick Answer

Oil Type

$API - SAE 5W-20

Capacity (w/ Filter)

5.00 QTS.

4.73 L

Variant

Limited Jet, 4WD, Automatic

Note: SAE 5W-30 engine oil approved to MB 229.31 or MB 229.51 may be used when SAE 5W-20 engine oil is not available. For countries that use the ACEA European Oil Categories for Service Fill Oils, use the recommended engine oil that meets the requirements of ACEA C3, and approved to MB 229.31 or MB 229.51 only. Refer to your engine oil filler cap for correct SAE grade

This vehicle's factory manual

2012 Jeep Liberty: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual
Sister site: See this spec on WhatTypeOfOil.com β€” our quick oil type & capacity lookup for every vehicle.
Other specs:All specs

Related for Your 2012 Jeep Liberty

Frequently Asked Questions

What type of oil does a 2012 Jeep Liberty take?
The 2012 Jeep Liberty requires API - SAE 5W-20. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the Limited Jet, 4WD, Automatic configuration.
How much oil does a 2012 Jeep Liberty need?
The 2012 Jeep Liberty takes 5.00 QTS. (4.73 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 2012 Jeep Liberty?
Yes β€” synthetic oil that meets the API - SAE 5W-20 specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 2012 Jeep Liberty?
Using oil that does not meet the API - SAE 5W-20 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.