Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Ford PickupOil Type & Capacity
OEM spec from the factory service manual for the F150, 2D Pickup, 3.5L Eng VIN T, 4WD, Automatic T/Case Control variant.
Quick Answer
Oil Type
$SAE 5W-30 Premium Synthetic Blend Motor Oil
Capacity (w/ Filter)
6.00 QTS.
5.67 L
Variant
F150, 2D Pickup, 3.5L Eng VIN T, 4WD, Automatic T/Case Control
Note: Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only to meet the requirements of FORD Specification WSS-M2C946-A and the API Certification mark.
This vehicle's factory manual
2012 Ford Pickup: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 2012 Ford Pickup
Frequently Asked Questions
- What type of oil does a 2012 Ford Pickup take?
- The 2012 Ford Pickup requires SAE 5W-30 Premium Synthetic Blend Motor Oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the F150, 2D Pickup, 3.5L Eng VIN T, 4WD, Automatic T/Case Control configuration.
- How much oil does a 2012 Ford Pickup need?
- The 2012 Ford Pickup takes 6.00 QTS. (5.67 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2012 Ford Pickup?
- Yes — synthetic oil that meets the SAE 5W-30 Premium Synthetic Blend Motor Oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2012 Ford Pickup?
- Using oil that does not meet the SAE 5W-30 Premium Synthetic Blend Motor Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.