Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Ford FusionOil Type & Capacity
OEM spec from the factory service manual for the SE, 2.5L Eng VIN A variant.
Quick Answer
Oil Type
MOTORCRAFT SAE 5W-20 or equivalent meeting Ford specification WSS-M2C945-A
Capacity (w/ Filter)
5.30 QTS.
5.01 L
Variant
SE, 2.5L Eng VIN A
Note: SAE 5W-20 oil provides optimum fuel economy and durability performance meeting all requirements for your vehicle’s engine.
Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only to meet the requirements of FORD specification WSS-M2C945-A and the API certification mark.
Source: Factory service manual — 2012 Ford Fusion SE, 2.5L Eng VIN A. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2012 Ford Fusion take?
- The 2012 Ford Fusion requires MOTORCRAFT SAE 5W-20 or equivalent meeting Ford specification WSS-M2C945-A. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the SE, 2.5L Eng VIN A configuration.
- How much oil does a 2012 Ford Fusion need?
- The 2012 Ford Fusion takes 5.30 QTS. (5.01 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2012 Ford Fusion?
- Yes — synthetic oil that meets the MOTORCRAFT SAE 5W-20 or equivalent meeting Ford specification WSS-M2C945-A specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2012 Ford Fusion?
- Using oil that does not meet the MOTORCRAFT SAE 5W-20 or equivalent meeting Ford specification WSS-M2C945-A specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.