Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Dodge DurangoCoolant Type & Capacity
OEM spec from the factory service manual for the Citadel, 3.6L Eng VIN G, AWD variant.
Quick Answer
Coolant Type
MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent
Capacity
11.40 QTS.
10.78 L
Variant
Citadel, 3.6L Eng VIN G, AWD
This vehicle's factory manual
2012 Dodge Durango: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
What You'll Need
Engine Coolant / Antifreeze
MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent for Dodge Durango
Search Amazon →
Tool
Spill-Free Coolant Funnel
Search Amazon →
Tester
Coolant Tester / Hydrometer
Search Amazon →
Drain Pan
Coolant Drain Pan
Search Amazon →
Related for Your 2012 Dodge Durango
Maintenance Specs
Popular Repairs
Frequently Asked Questions
- What type of coolant does a 2012 Dodge Durango take?
- The 2012 Dodge Durango requires MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Citadel, 3.6L Eng VIN G, AWD configuration.
- How much coolant does a 2012 Dodge Durango hold?
- The 2012 Dodge Durango cooling system capacity is 11.40 QTS. (10.78 L).
- Can I use universal coolant in my 2012 Dodge Durango?
- It is strongly recommended to use coolant that meets the MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2012 Dodge Durango?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.