Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Chrysler 300Oil Type & Capacity
OEM spec from the factory service manual for the S, 3.6L Eng VIN G, 4WD, Gas variant.
Quick Answer
Oil Type
API - SAE 5W-30
Capacity (w/ Filter)
6.00 QTS.
5.67 L
Variant
S, 3.6L Eng VIN G, 4WD, Gas
Source: Factory service manual — 2012 Chrysler 300 S, 3.6L Eng VIN G, 4WD, Gas. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2012 Chrysler 300 take?
- The 2012 Chrysler 300 requires API - SAE 5W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the S, 3.6L Eng VIN G, 4WD, Gas configuration.
- How much oil does a 2012 Chrysler 300 need?
- The 2012 Chrysler 300 takes 6.00 QTS. (5.67 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2012 Chrysler 300?
- Yes — synthetic oil that meets the API - SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2012 Chrysler 300?
- Using oil that does not meet the API - SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.