Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Chrysler 200Oil Type & Capacity
OEM spec from the factory service manual for the LX, 2.4L Eng VIN B, Eng CD ED3, Trans Mfr CD 40TE variant.
Quick Answer
Oil Type
API - SAE 5W-20
Capacity (w/ Filter)
4.50 QTS.
4.25 L
Variant
LX, 2.4L Eng VIN B, Eng CD ED3, Trans Mfr CD 40TE
Note: For countries that use the ACEA European Oil Categories for Service Fill Oils, use the recommended engine oil that meets the requirements of ACEA C3, and approved to MB 229.31 or MB 229.51 only. SAE 5W-30 engine oil approved to MB 229.31 or MB 229.51 may be used when SAE 5W-20 engine oil is not available
Source: Factory service manual — 2012 Chrysler 200 LX, 2.4L Eng VIN B, Eng CD ED3, Trans Mfr CD 40TE. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2012 Chrysler 200 take?
- The 2012 Chrysler 200 requires API - SAE 5W-20. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the LX, 2.4L Eng VIN B, Eng CD ED3, Trans Mfr CD 40TE configuration.
- How much oil does a 2012 Chrysler 200 need?
- The 2012 Chrysler 200 takes 4.50 QTS. (4.25 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2012 Chrysler 200?
- Yes — synthetic oil that meets the API - SAE 5W-20 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2012 Chrysler 200?
- Using oil that does not meet the API - SAE 5W-20 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.