Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Chevrolet SilveradoOil Type & Capacity
OEM spec from the factory service manual for the 2D Cab Chassis, 6.0L Eng VIN G, 4WD variant.
Quick Answer
Oil Type
$API - SAE 5W-30
Capacity (w/ Filter)
6.00 QTS.
5.67 L
Variant
2D Cab Chassis, 6.0L Eng VIN G, 4WD
Note: Use only engine oil licensed to the dexos1 specification, or equivalent.
ACDelco dexos1 Synthetic Blend is recommended.
Failure to use the recommended engine oil or equivalent can result in engine damage not covered by the vehicle warranty. Check to be sure the oil is approved to the dexos1 specification.
For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures.
DO NOT use other viscosity grade oils such as SAE 10W-30, 10W-40, or 10W-50.
This vehicle's factory manual
2012 Chevrolet Silverado: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2012 Chevrolet Silverado
Frequently Asked Questions
- What type of oil does a 2012 Chevrolet Silverado take?
- The 2012 Chevrolet Silverado requires API - SAE 5W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 2D Cab Chassis, 6.0L Eng VIN G, 4WD configuration.
- How much oil does a 2012 Chevrolet Silverado need?
- The 2012 Chevrolet Silverado takes 6.00 QTS. (5.67 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2012 Chevrolet Silverado?
- Yes — synthetic oil that meets the API - SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2012 Chevrolet Silverado?
- Using oil that does not meet the API - SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.