2012 Chevrolet CamaroOil Type & Capacity

OEM spec from the factory service manual for the SS, 2D Convertible, 6.2L Eng VIN J variant.

Quick Answer

Oil Type

$API - SAE 5W-30

Capacity (w/ Filter)

8.00 QTS.

7.57 L

Variant

SS, 2D Convertible, 6.2L Eng VIN J

Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.

This vehicle's factory manual

2012 Chevrolet Camaro: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual
Sister site: See this spec on WhatTypeOfOil.com β€” our quick oil type & capacity lookup for every vehicle.

Related for Your 2012 Chevrolet Camaro

Frequently Asked Questions

What type of oil does a 2012 Chevrolet Camaro take?
The 2012 Chevrolet Camaro requires API - SAE 5W-30. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the SS, 2D Convertible, 6.2L Eng VIN J configuration.
How much oil does a 2012 Chevrolet Camaro need?
The 2012 Chevrolet Camaro takes 8.00 QTS. (7.57 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 2012 Chevrolet Camaro?
Yes β€” synthetic oil that meets the API - SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 2012 Chevrolet Camaro?
Using oil that does not meet the API - SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.