Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Acura RdxOil Type & Capacity
OEM spec from the factory service manual for the 2.3L Eng VIN TB1 variant.
Quick Answer
Oil Type
$API - SAE 5W-30
Capacity (w/ Filter)
5.00 QTS.
4.73 L
Variant
2.3L Eng VIN TB1
Note: Excluding the oil remaining in the engine.
Always use MOBIL1 or an equivalent oil that meets the ACURA HTO-06 standard.
This vehicle's factory manual
2012 Acura Rdx: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 2012 Acura Rdx
Quick Actions
Frequently Asked Questions
- What type of oil does a 2012 Acura Rdx take?
- The 2012 Acura Rdx requires API - SAE 5W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 2.3L Eng VIN TB1 configuration.
- How much oil does a 2012 Acura Rdx need?
- The 2012 Acura Rdx takes 5.00 QTS. (4.73 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2012 Acura Rdx?
- Yes — synthetic oil that meets the API - SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2012 Acura Rdx?
- Using oil that does not meet the API - SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.