Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Volvo XC60Oil Type & Capacity
OEM spec from the factory service manual for the 3.2 R-Design variant.
Quick Answer
Oil Type
ILSAC, GF-4, API - SL, or ACEA A1/B1, SAE 5W-30
Capacity (w/ Filter)
7.18 QTS.
6.79 L
Variant
3.2 R-Design
Note: Synthetic oils meeting SAE 0W-30 or 0W-40 and complying with oil quality requirements are recommended for driving in areas of sustained temperature extremes (hot or cold), when towing a trailer over long distances, and for prolonged driving in mountainous areas.
Source: Factory service manual — 2011 Volvo XC60 3.2 R-Design. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2011 Volvo XC60 take?
- The 2011 Volvo XC60 requires ILSAC, GF-4, API - SL, or ACEA A1/B1, SAE 5W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 3.2 R-Design configuration.
- How much oil does a 2011 Volvo XC60 need?
- The 2011 Volvo XC60 takes 7.18 QTS. (6.79 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2011 Volvo XC60?
- Yes — synthetic oil that meets the ILSAC, GF-4, API - SL, or ACEA A1/B1, SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2011 Volvo XC60?
- Using oil that does not meet the ILSAC, GF-4, API - SL, or ACEA A1/B1, SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.