Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Toyota 4runnerOil Type & Capacity
OEM spec from the factory service manual for the Limited, AWD variant.
Quick Answer
Oil Type
$SAE 0W-20 Synthetic Oil
Capacity (w/ Filter)
6.60 QTS.
6.24 L
Variant
Limited, AWD
Note: SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change.
This vehicle's factory manual
2011 Toyota 4runner: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2011 Toyota 4runner
Frequently Asked Questions
- What type of oil does a 2011 Toyota 4runner take?
- The 2011 Toyota 4runner requires SAE 0W-20 Synthetic Oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Limited, AWD configuration.
- How much oil does a 2011 Toyota 4runner need?
- The 2011 Toyota 4runner takes 6.60 QTS. (6.24 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2011 Toyota 4runner?
- Yes — synthetic oil that meets the SAE 0W-20 Synthetic Oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2011 Toyota 4runner?
- Using oil that does not meet the SAE 0W-20 Synthetic Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.