Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Subaru TribecaOil Type & Capacity
OEM spec from the factory service manual for the Limited variant.
Quick Answer
Oil Type
$ILSAC GF-4, API - SM or SL, SAE 5W-30
Capacity (w/ Filter)
6.70 QTS.
6.34 L
Variant
Limited
Note: Engine Oil viscosity (thickness) affects fuel economy. Oils of lower viscosity provide better fuel economy. However, in hot weather, oil of higher viscosity is required to properly lubricate the engine. API SM or SL SAE 30, 40, 10W-50, 20W-40, 20W-50.
This vehicle's factory manual
2011 Subaru Tribeca: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 2011 Subaru Tribeca
Frequently Asked Questions
- What type of oil does a 2011 Subaru Tribeca take?
- The 2011 Subaru Tribeca requires ILSAC GF-4, API - SM or SL, SAE 5W-30. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Limited configuration.
- How much oil does a 2011 Subaru Tribeca need?
- The 2011 Subaru Tribeca takes 6.70 QTS. (6.34 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2011 Subaru Tribeca?
- Yes — synthetic oil that meets the ILSAC GF-4, API - SM or SL, SAE 5W-30 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2011 Subaru Tribeca?
- Using oil that does not meet the ILSAC GF-4, API - SM or SL, SAE 5W-30 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.